Tiller restoration progress

The tiller on the boat, which I'm fairly certain is made of ash, had dulled to an ugly driftwood color and was a little smelly. I sanded it a bit and got some of the original "warm" wood color to come out, but ultimately I think the discoloration in the wood is a little too deep for sanding to be viable. Fortunately, the tiller appears sound (I poked around in it with an awl to be sure), so I'm going to paint it white and then varnish it. Hope to pick up the paint and varnish tomorrow so I can get started. 

Effort (sanding, applying wood filler, sanding): 1 hour

Cost: $12 for sandpaper of varying grains, which will be re-used

Rigging instructions

I found this rigging guide on wichard-usa.com -- it's for a 222, which is very similar to the 22 which I have. The running rigging on the boat and the blocks might be salvageable, but I wanted to start researching the parts now so I'd be informed if I had to make a decision later. If there's anything that I'm happy to spend money on, it's in making sure that the tackle on the boat is safe, reliable, and responsive.

O'day 22 in my driveway

O'day 22
Originally uploaded by bdeakin

Here's a picture of the sailboat, sitting in my driveway. I'll post a picture soon with the tarp up (I've since relocated the bottom of the mast on the bow of the boat to a fender sitting on the pulpit, which is helping keep the rain from pooling and freezing in the tarp). Then, once spring rolls around and I take the tarp down so I can start work, I'll post some more pictures.

Water in cockpit locker - O'day 22 - SailboatOwners.com

I posted the following topic on SailboatOwners.com to ask a general question about water I had found in one of the cockpit lockers.

Water in cockpit locker - O'day 22 - SailboatOwners.com

Posted using ShareThis

First post

I started this blog so that I could catalog my experience in restoring a 1977 O'day 22 sailboat. I live in Central NJ and I bought this boat for a song with a 9.9HP engine and a trailer. In retrospect, maybe it wasn't the best idea.

Let me explain. I started sailing this past summer with a local club and I loved it; getting out on the water and being able to basically pick a direction and go is a beautiful thing. Sailing is kind of a thinking man's sport and you have to keep your wits about you and sometimes just improvise to do what you want to do, and that's kind of fun.

I say it was a bad idea because the boat I picked up is used, and though it appears structurally sound, it needs a bit of work before it gets in the water. And despite having gone to school for engineering, my skill at everyday DIY projects is practically non-existant. I've bought plenty of books but even the most basic ones seem to assume some skills that I just don't have yet.

So, I'm at a point where I've basically decided it's time to just jump right in, get my hands dirty, and figure things out as I go. So, that's that.

My goals for this summer (2010) are fairly modest:

1. Get the boat up to snuff and in the water

2. Sail it around the Navesink River

3. Sail it out to Sandy Hook Bay a few times

Things to do:

1. Post some pictures of the boat

2. Post my plans for work to be done getting the boat ready

3. Start a project and document it

Thanks for reading!